PLOT No. 123, H.No.2-24/10-15, LAKSHMI NARAYANA NA, Hyderabad, Telangana
GST No. 36AAQFP2630P1ZN
Approx. Rs 105 / KgGet Latest PriceProduct BrochureProduct Details:
|Minimum Order Quantity||50 Kg|
|Mortar Grade||Cementatious Fire Barrier|
|Type||Cementatious Fire Barrier|
|Country of Origin||Made in India|
|Usage/Application||Fire / Heat retardant Barrier|
|Packaging Size||25 Kgs Bag|
PFP 772 PRECISION FIRE-EX MORTAR BARRIER is a non-combustible fire protection mortar to seal cable penetrations through walls and ceilings.
It is designed to seal the penetration gaps such that the other side of the wall and floor are protected from fire, smoke & heat.
PFP 772, is upto 4 Hrs Fire Rated mortar barrier & it is pre-mixed dry blend, consisting of minerals, inorganic fillers & fire retardant agents.
When mixed with water it produces a trowel able or Pourable grade.
While curing, the mortar expands slightly & ensures an air tight seal around penetrations and within the opening.
Once installed, PFP 772 Mortar sets within approximately 30 - 60 minutes.
Meets IS: 12458 test standards
PFP 772 can be applied by trowel or hand of pouring in cavity.
No need for special equipment.
Surface treatment can be done with PFP 777 Fire-Ex Coat - Intumescent coating, else non-flammable water based paints can be applied for colour coding etc.
Retrofitting: Easy to retrofit with simple tools PFP 772 bonds excellently to cured PFP 772 / Cement Mortar & Concrete.
Filling volume: Approx.75 (+/-2) Kg of mix for 1 Mtr x 1 Mtr x 100 mm thick wall.
Solvent to be mixed: Water
Appearance: Mixture of Grey, white / brown particles
Pot Life: Approx. 25 to 30 minutes at +25C
Full cure time: Approx. 18 hrs at +25C
Bond strength: Bonds excellently to concrete,
masonry, Brick etc.
Density: About 750 (+/- 25) kg/m3
Shore A hardness: 80 after 72 hrs at 25 C
pH values: Approx. 12.0
Mixing ratio: 30- 35% volume of water by volume.
Fire Rating: 100 mm thick wall for about 2 Hrs & 200
mm thk for about 4 Hrs.
Storage Keep dry and insulate if surrounding is
Shelf-Life: 3-6 Months as per atmospheric
Packaging: 25 kg plastic-lined PP bag.
Approx. Rs 515 / KgGet Latest PriceProduct BrochureProduct Details:
|Form Of Paint||Liquid|
|Paint Base Type||Water Based Paint|
|Packaging Size||20 Kg|
> PFP 777 FIRE-EX is single part, ready to use water based coating provides an effective Fire suppression layer.
> PFP 777 FIRE-EX can be applied to many types of surfaces providing an attractive matty finish.
> PFP 777 FIRE-EX is Suitable for both INDOOR & OUTDOOR use. Once cured, will not wash off by rain water / Water splashing.
> The main function of PFP 777 FIRE-EX coating is to prevent flame propagation along vertical and horizontal structures.
> PFP 777 FIRE-EX coating can be easily applied by conventional methods such as brush, as well as by hand trowel.
Approx. Rs 500 / KgGet Latest PriceProduct BrochureProduct Details:
|Minimum Order Quantity||20 Kg|
|Types Of Surface||Cables wood, Metal, Concrete, Chipboard, Hardwoods|
|Ph Value||7.5 (+/-0.5)|
|Density||1.24 (+/-) 0.03 Gms / cc|
|Packaging Size||10 Kgs / 20 Kgs|
|Drying Time||Touch Dry, 2 - 4 hours. Full cure 48 - 72 hours.|
Approx. Rs 310 / KgGet Latest PriceProduct BrochureProduct Details:
|Minimum Order Quantity||5 Kg|
|Usage/Application||FABRIC, PAPER, WOOD TREATMENT|
This product is highly effective, economical and environmentally friendly fire retardant treatment for fabric of most types. It can be used as a fire retardant and impregnating agent on practically all water absorbent materials. PFP 779 can be applied by spraying, padding or immersion. The method of application depends on the type of material and structure of the fiber to be protected.
PFP 779 is an aqueous solution of inorganic salts. It is colorless and has a slight odor of ammonia in solution but is odorless when dry. It is almost neutral with a pH of 6.0 to 7.0. Its primary role is to act as a flame retardant. Since PFP 779 PRECISION FIRE RETARDANT COAT FOR FABRIC is water soluble it can be washed out of both textiles and materials. Retreat after laundering. It is in ready to use, liquid form.
Approx. Rs 440 / KgGet Latest PriceProduct BrochureProduct Details:
|Grade Standard||Industrial Grade|
|Usage/Application||Fire seal putty|
|Packaging Size||10 Kg|
|Consistency||Soft And Tacky|
|Solubility||Insoluble in water,Mineral Acids and Alkalis|
Features & Benefits:
· Single compound, permanent elastic, non-corrosive Fire retardant sealing compound / Putty with high voltage insulation & weather proofing properties.
· To seal gaps of cable / pipes / metal penetrations in concrete / cement walls, metal panels or board partitions where sealing by conventional means is difficult or not possible.
· Unique feature of mould ability, self-adhesive, non-drying, retains elasticity, can be removed & reused safely for fire sealing.
· Excellent ageing properties and is recommended up to 150° C for continuous operating temp. However its actual softening point is about 200° C.
· Non-toxic, Non-irritant, harmless to skin. Can be applied on Cement, Steel, Aluminium, Copper, porcelain etc.
· For fire & smoke sealing of walls / cable penetrant shafts etc.
· For Air tight & Moisture proof sealing.
Explore More Products
Developed and Managed by IndiaMART InterMESH Limited