Speciality Maintenance Spray

Approx. Rs 5,950 / PieceGet Latest Price

SIZE: 4" X 12'''''''' LONG

Introduction:

Wrap Seal® ULTRA Quick Repair Kit for Active Pipe Leaksis a leak repair system that no shutdown required. It is applicable on any metal or non-metal pipes and used in

many industries such as oil and gas, petrochemical, offshore, marine, etc.

Features:

· Repairs under active leak up to 150 psi (11 kg/cm²) pressure

· Applicable to pipes up to 18” (457 mm) diameter

· Withstand pressure up to 500 psi (35 kg/cm²)

· Withstand temperature up to 200 °C (392 °F)

· Safe for drinking water and resistant to most chemicals

· Ideal for pipeline reinforcement

Typical Properties:

Operating temperature                -50 °C to 200 °C (-58 °F to 392 °F)

Tensile strength                          3,920 psi (276 kg/cm²)

Bond strength                             230 psi (16 kg/cm²)

Compression strength                 13,750 ± 530 psi (967 ± 37 kg/cm²)

Yield strength                              2,260 psi (159 kg/cm²)

Cured hardness                          82 Shore D

Dielectric strength                       400 Volts/mil

Application:

· Pipe repairs:

active pipe leaks

sealing joints

hazardous material spill control

reinforce thinning walls

· Repairs in hard to reach areas

· Underwater repairs

Directions for Use:

1. Minimize the flow rate and reduce system pressure

2. Roughen the area to be repaired

3. Knead the Seal Stic®

4. Place the Seal Stic® away from the leak location

5. Start wrapping the SealXpert® Ultra Sealing Tape a few distances away from the leak location

6. Continue to wrap SealXpert® Ultra Sealing Tape onto pipe while pushing the Seal Stic® onto leak location

7. Immerse Wrap Seal® Fiberglass Tape into water

8. Wrap the Wrap Seal® Fiberglass Tape above the repair tape as tightly and evenly as possible, using the entire roll

9. Discard the plastic tube at the end of the roll

10. Wet gloves in water and quickly compress the bubbling resins back into the fiberglass wrap until all bubbling has stopped.

11. Repair completed with smooth and hard ivory appearance

Additional Information:

• Delivery Time: PRICE IS EX-HYDERABAD. GST APPLICABLE EXTRA @ 18%.

Approx. Rs 400 / PieceGet Latest Price

PSM 5113 Precision Anti Corrosive Wax Coat (Green):

· Heavy duty

· Translucent Green Flexible Film

· Long Term Protection

· Effective from (-40°F to +175°F)

· Easily removed with solvent cleaners

· Highly resistant to salt spray and harsh weather.

· 06 – 24 Months protection.

. For Steel mold & parts protection

Additional Information:

• Delivery Time: PRICE IS EX-HYDERABAD. GST APPLICABLE EXTRA @ 18%.
• Packaging Details: AEROSOL CAN

Approx. Rs 200 / PieceGet Latest Price

PC 790 PRECISION MULTI-USE FLUID SPRAY:

PC 790 is a versatile, Hydrocarbon based penetrant, lubricant and corrosion inhibitor.
Its unique viscosity allows it to cover more surface area and penetrate deep into the parting surface of all metals including steel, copper, brass and aluminium.
It displaces moisture and leaves a thin, long-lasting film to protect against corrosion and wear.

Penetrant –

Seeps through rust and corrosion to release jammed nuts and bolts.

Moisture Displacer -
Low surface tension allows Maintain to creep under water to provide a protective barrier between moisture and the metal surface.

Lubricant –

High quality of oils provide superior lubrication even under extreme pressure, resists wear.

Rust Protection –

Protects steel surfaces against salt corrosion and rust in humidity conditions.

Cleaner –

Cleans and degreases light soil from surface plates, chucks, wire and other machined or polished metal surfaces. Removes sticker glue crayon marks

Additional Information:

• Delivery Time: PRICE IS EX-HYDERABAD. GST APPLICABLE EXTRA @ 18%.
• Packaging Details: SPRAY CAN

Approx. Rs 430 / PieceGet Latest Price

• PSM 5102 PRECISION BELT DRESSER:
• Protects transmission drive belts made of rubber, leather or synthetic material
• It prevents belt slippage, improves transmission, extends belt life, improves friction & enhances grip.
• Can be used on Flat, Round V-belts

FOB: 350 - INR

MOQ: 5 - Can

Additional Information:

• Delivery Time: PRICE IS EX-HYDERABAD. GST APPLICABLE EXTRA @ 18%.
• Packaging Details: AEROSOL CAN

Approx. Rs 380 / PieceGet Latest Price

PSM 5115 Precision Paint And Gasket Remover Spray:
Facilitates in removing binded gaskets.
Excellent in loosening / debonding paint & remove effortlessly. Removes burned carbon from electric panels etc.

Additional Information:

• Delivery Time: PRICE IS EX-HYDERABAD. GST APPLICABLE EXTRA @ 18%.
• Packaging Details: SPRAY CAN

Approx. Rs 400 / PieceGet Latest Price

PC 7060 PRECISION SUPREME SAFE SOL CLEANER (NF)

PC 7060 is a low odour, fast penetrating, and special blend of chlorinated solvent and selected oxygenated solvents for precision cleaning of electrical parts.

PC 7060 flushes and removes grease, oil, dirt and other contaminants and quickly evaporates without leaving a film or residue.

PC 7060 is safe to use on metals and modern Industrial plastics without risk of costly damage. It is a cost effective and an alternative to all contact cleaners.

PC 7060 is non- flammable, ozone friendly and CO2 propellant, hence user and environment safe.

PC 7060 can be used on online applications as well (upto 440 Volts only)

Additional Information:

• Delivery Time: PRICE IS EX-HYDERABAD. GST APPLICABLE EXTRA @ 18%.

Approx. Rs 480 / PieceGet Latest Price

PRB 7130 PRECISION HD RUST-PEN oil

FEATURES & BENEFITS:
• Penetrates into hard-to-reach areas quickly.
• Disperses rust, scale and other oxides.
• Frees metal parts seized by dirt, rust, corrosion or dried-up greasy
   deposits.
• Quick disassembly of mechanical fittings, assemblies, nuts &
   bolts and other close tolerance fasteners.
• Leaves a solid lubricating film. Does not contain silicones.
• Reduces wear and facilitates future disassembly.
• Lowers maintenance costs, Reduces scrap rate of seized parts.
• Safe for all metals and for most plastics and rubbers (if in doubt, 
   on-the-job testing prior to use is advised)

Additional Information:

• Item Code: PRB7130
• Delivery Time: PRICE IS EX-HYDERABAD. GST APPLICABLE EXTRA @ 18%.

Approx. Rs 400 / PieceGet Latest Price

• PSM 5108 PRECISION ADHESIVE CHAIN LUBRICANT:
• Tacky Lubricant which penetrates inside chain links, pin bush assembly resists splashing.
• Unique tacky compound which provides excellent lubricantion to complex dynamics of chain assembly.
• Ideal for Automobile chain assenblies, Simplex / Duplex / Triplex chain asseblies.

FOB: 375 - INR

MOQ: 5 - Can

Additional Information:

• Delivery Time: PRICE IS EX-HYDERABAD. GST APPLICABLE EXTRA @ 18%.

Approx. Rs 310 / LitreGet Latest Price

Additional Information:

• Delivery Time: PRICE IS EX-HYDERABAD. GST APPLICABLE EXTRA @ 18%.

Approx. Rs 400 / PieceGet Latest Price

PSM 5112 - Precision Heavy Duty Corrosion Inhibitor :

Excellent Anti-corrosion Fluid

Good water repellency

Good adherence to the metal surface

Easily removable by degreasers before usage of components

Indoor protection: 1- 1.5 Yrs, Outdoor protection: 6 Months to 1 Yr.

Additional Information:

• Delivery Time: PRICE IS EX-HYDERABAD. GST APPLICABLE EXTRA @ 18%.

Approx. Rs 3,350 / PieceGet Latest Price

SIZE: 2" X 6'''''''' LONG

Introduction:

Wrap Seal® ULTRA Quick Repair Kit for Active Pipe Leaksis a leak repair system that no shutdown required. It is applicable on any metal or non-metal pipes and used in

many industries such as oil and gas, petrochemical, offshore, marine, etc.

Features:

Repairs under active leak up to 150 psi (11 kg/cm²) pressure

 Applicable to pipes up to 18” (457 mm) diameter

 Withstand pressure up to 500 psi (35 kg/cm²)

 Withstand temperature up to 200 °C (392 °F)

 Safe for drinking water and resistant to most chemicals

 Ideal for pipeline reinforcement

Typical Properties:

Operating temperature                -50 °C to 200 °C (-58 °F to 392 °F)

Tensile strength                          3,920 psi (276 kg/cm²)

Bond strength                             230 psi (16 kg/cm²)

Compression strength                 13,750 ± 530 psi (967 ± 37 kg/cm²)

Yield strength                              2,260 psi (159 kg/cm²)

Cured hardness                          82 Shore D

Dielectric strength                       400 Volts/mil

Application:

Pipe repairs:

active pipe leaks

sealing joints

hazardous material spill control

reinforce thinning walls

Repairs in hard to reach areas

Underwater repairs

Directions for Use:

1. Minimize the flow rate and reduce system pressure

2. Roughen the area to be repaired

3. Knead the Seal Stic®

4. Place the Seal Stic® away from the leak location

5. Start wrapping the SealXpert® Ultra Sealing Tape a few distances away from the leak location

6. Continue to wrap SealXpert® Ultra Sealing Tape onto pipe while pushing the Seal Stic® onto leak location

7. Immerse Wrap Seal® Fiberglass Tape into water

8. Wrap the Wrap Seal® Fiberglass Tape above the repair tape as tightly and evenly as possible, using the entire roll

9. Discard the plastic tube at the end of the roll

10. Wet gloves in water and quickly compress the

bubbling resins back into the fiberglass wrap until all

bubbling has stopped.

11. Repair completed with smooth and hard ivory

appearance

Additional Information:

• Delivery Time: PRICE IS EX-HYDERABAD. GST APPLICABLE EXTRA @ 18%.